Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Camarillo?
Spring replacement in Camarillo typically runs $180 – $340 for a standard residential door, and most jobs are done in a single visit. That range covers the springs themselves, the labor to wind and balance them, and a proper safety check. Torsion springs cost more than extension springs because they carry more tension and require more care. Older doors with two springs, oversize doors, and doors that also need cables can push the total toward the top of the range.
The exact quote depends on how many springs you have, their size and cycle rating, and the condition of the cables, drums, and tracks around them. We’ll give you a flat, upfront number before anyone touches the door. Call (855) 341-8382 for a free estimate.
Spring Replacement Cost Breakdown (2026)
Here’s how spring replacement breaks down by line item for a Camarillo home. These are the ranges we quote, not teaser numbers.
| Line item | Typical range |
|---|---|
| Single torsion spring replacement (one spring) | $180 – $260 |
| Double torsion spring replacement (both springs) | $260 – $340 |
| Extension spring set (both sides) | $180 – $260 |
| Cable repair, if cables are frayed or shot | $130 – $250 |
| Opener repair, if the opener is also failing | $120 – $320 |
| Panel replacement, if a panel was damaged | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
Most Camarillo homeowners fall in the middle of these ranges. The lower end is a single torque-matched torsion spring on a one-car door with nothing else wrong. The upper end is a two-car door that needs both springs plus a cable that was ready to snap. We inspect the whole door before quoting, so the number you hear is the number you pay. For the full list of what spring work includes, see Spring Replacement in Camarillo.
What Affects Spring Replacement Pricing in Camarillo
The spring itself is a small part of your bill. Most of what you pay for is diagnosis, labor, and the risk of working with stored tension. Here’s what moves the price up or down.
- How many springs you have. A standard two-car door usually has two torsion springs. If one fails, the other is almost always the same age and on its way out, so most sensible jobs replace both. That’s the difference between a one-spring job around $180 – $260 and a pair around $260 – $340.
- Torsion vs. extension springs. Extension springs are simpler, cheaper, and usually run on the lighter end. Torsion springs carry far more stored force and take a trained hand to wind safely, so they cost more. Most newer Camarillo homes (Spanish Hills, Mission Oaks, the newer tracts off Las Posas) have torsion springs.
- Spring cycle rating. You can buy a spring rated for about 10,000 cycles (seven years or so of daily use) or one rated for 25,000-plus. The high-cycle spring costs more up front and lasts much longer. On a door you use twice a day, the premium spring is usually the better math.
- Door size and weight. A wide, insulated, glass-paneled or wood door on a larger opening needs heavier springs. Camarillo’s custom homes off Santa Rosa Road and the hillside properties above the coast often run bigger doors than a stock tract home.
- Condition of the surrounding parts. Rusted cables, worn drums, a bent track, or a sagging door bearing plate all add to the job. It’s cheaper to fix a worn cable during a spring replacement than to wait until it snaps.
- Local climate wear. Camarillo’s dry summers and marine air off the coast are harder on metal than most people realize. We regularly see springs and cables in older homes near the Camarillo Airport and around Old Town that fail early because of dust, heat cycling, and salt air. Lubrication goes a long way, but heat and dry air still age springs eventually.
Brand doesn’t change the spring price much, but it changes what a tech can service around the spring. We work on virtually any equipment a home already has, which means we don’t have to sell you a new opener to get the door closing again. Our team is fluent across LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That breadth matters when your spring fails on an older door someone else installed.
Can You Fix a Broken Spring the Same Day?
In most cases, yes. A broken spring is one of the most common calls we get in Camarillo, and it’s a job we can usually complete in one visit. We carry common spring sizes on the truck. If your door uses an unusual size or a high-cycle spring that has to be matched exactly, we’ll tell you before we leave and set a time.
One thing to understand: a door with a broken spring is not safe to operate. Don’t try to lift it or run the opener. The spring counterbalances the door’s weight, and without it the door can drop or the opener can strip its gear. A trained technician should do the work. If your door is stuck open or won’t close and you need help now, call (855) 341-8382 and we’ll talk through your options.
How to Save on Spring Replacement
There aren’t many corners to cut safely on spring work, but a few choices save real money without risking the door.
- Replace both springs at once. If one failed, the second is the same age. Paying for two springs in one visit costs less than two separate visits later, and you avoid a second failure in a month.
- Choose the high-cycle spring on a busy door. It costs more today and usually lasts two to three times as long. Over a decade, it’s the cheaper route.
- Fix small wear items during the same visit. A frayed cable or worn roller replaced alongside a spring costs less than a separate trip.
- Keep the door lubricated. A light lubrication of the springs, hinges, and rollers every six months helps a door live longer, especially in Camarillo’s dry heat.
- Get a flat quote before work starts. Free estimates are the cheapest insurance against a surprise bill. Call (855) 341-8382 and we’ll give you a firm number.
Is It Cheaper to Repair or Replace the Springs?
Almost always repair. A spring replacement at $180 – $340 is a small fraction of a new door installation, which runs $700 – $2,200 for a standard residential door. Replacing the door makes sense when the panels, frame, or structure are beyond saving: rusted through, cracked, or damaged in a way that no spring will fix. If the door is sound and the opener works, spring replacement is the right call. For a guide to the wider costs of a full repair, see our home page.
What Does Spring Replacement Include?
Our spring replacement covers the parts and the steps that keep the door safe:
- Diagnose the door and confirm which springs failed and why.
- Measure the door’s weight and match the new spring’s size and cycle rating to it.
- Wind down the remaining tension safely, then remove the old spring or springs.
- Install and tension the new spring or springs, then balance the door.
- Test the opener’s travel limits and safety reverse, and lubricate the moving parts.
- Walk you through what was done and what to watch for.
If we find worn cables or a bent track along the way, we’ll show you and price the fix before doing it. No surprise line items.
Why Camarillo Doors Fail the Way They Do
Springs are simple steel. They fail from cycles, corrosion, and heat. Camarillo’s combination of hot, dry summers and cool, humid mornings off the Pacific creates the kind of temperature swings that fatigue metal over time. Doors facing west or south get the worst of it. Homes near the coast (the neighborhoods around Camarillo State Beach, the tracts off Ponderosa and Lewis Road) get the salt air, which speeds up corrosion on cables and springs. If you’ve lived in the same house for ten years with the same springs, plan on replacing them before they break on a Sunday night with the car inside. We can check cycle life and swap worn springs on your schedule. Our Spring Replacement in Camarillo service covers timing and what to expect.
FAQs – Spring Replacement Cost
How much does it cost to replace a garage door spring in Camarillo?
Most jobs run $180 – $340. A single torsion spring replacement is typically $180 – $260, and replacing both springs on a two-car door runs $260 – $340. Extension spring sets usually land in the $180 – $260 range. Add cable or opener work and the total rises. Call (855) 341-8382 for an exact quote on your door.
Can one spring be replaced, or should both be done?
Replacing both is the smarter move in nearly every case. When one of a matched pair fails, the other is the same age and under the same load, so it typically lets go within a few months. Doing both in one visit costs less than two separate trips. Call (855) 341-8382 and we’ll tell you what your door needs.
Is a broken spring an emergency?
Yes, treat it as one. A door with a broken spring can’t be safely opened or closed by hand or by the opener, and forcing it can damage the opener or drop the door. Don’t run the motor. Call (855) 341-8382 and we’ll get you scheduled, often the same day.
How much does spring replacement cost if I also need cables or opener work?
Add the related item to the spring job. Cable repair runs $130 – $250 and opener repair runs $120 – $320. Bundling them in one visit usually beats separate trips. Call (855) 341-8382 and we’ll price everything together.
Does a high-cycle spring cost more, and is it worth it?
Yes, and usually yes. A high-cycle spring costs more up front but lasts two to three times longer than a standard spring. On a door you use twice a day, it pays for itself. Call (855) 341-8382 and we’ll quote both options for your door.
Get a Flat Quote Before You Buy
Spring work in Camarillo is predictable once a tech is on-site. You’ll get a clear, upfront price, a plan for the parts, and a door that closes smoothly when we leave. We’re a full-service operation: repair, opener repair, and new installation, all under the same standard. That’s the Statesman standard. Call (855) 341-8382 for a free estimate, and keep our number handy for when the door acts up. If you’re weighing a full replacement instead, we’ll walk you through your options and help you choose the right brand for the door you already have.
Pricing reflects the Camarillo market as of 2026. Statesman Garage Door Repair offers free estimates – call (855) 341-8382.
What Our Customers Say
"Keypad stopped working, which I assumed meant a whole new system. It was the batteries and a reprogram. He charged me the minimum service call and told me how to do it myself next time."
- Diego Ramirez"Good repair, reasonable money. The door still has a slight shudder about a foot from the top that he said is the track being slightly out of true on an old frame and would cost real money to fix properly. Fair enough, but I'd hoped it would be perfect."
- Marcus Boyd"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Norma Delgado